PCX-Reliable And Small Land Area 10 SUVs Rotary Parking System
Descriptions
Vertical Rotary Parking System 10 Cars or SUVs is the Rotary Parking System for 10 Cars; it mainly consists of steel structure, load carrier, drive system, control system, safety and detection system.
It is the designed system that an automobile is put in the cage, the cage rotates up and down as well as right and left and then the automobile is parked.
This Automatic Parking System is designed 10 cars or 10 SUV's to be parked easily and safely, on the surface area required to park 2 cars. It is simple to operate with the driver parking and leaving the vehicle in the system at ground level.
Once the driver leaves the incorporated safety zone the vehicle is automatically parked by the system rotating to lift the parked car away from the bottom central position. This leaves an empty parking space available at ground level, for the next car to be parked on.
The parked car is easily retrieved by IC card or pushing the button for the relevant position number the car is parked on. This causes the required car to rotate down to ground level ready for the driver to enter the safety zone and reverse the car out of the system.
Working Principle
Each space has a car pallet, the pallets for parking or retrieving will rotate along a direction to realize the parking or retrieving space to the ground; Driver can park or get the car directly in the ground space;
Steps: All cars will rotate along the clockwise or anti-clockwise until the car get to ground; For example in the following picture show, if we want to get the No. 6 car, the cars from No. 1 to No. 10, all rotate along anti-clock direction; The No.6 pallet falls to the ground and driver can take it away directly;
Characteristics
Main Structures
Rotary parking system is composed of 7 basic structures
Foundation, Steel structure, Pallets, Transmission, Control System, Safety Protection Devices and other Auxiliary Devices;
Technical parameters
Item | Parameters |
Type | Vertical Rotary |
Levels of system | 6 |
Paring Spaces | 10 |
Size of car (L*W*H) |
5300*1900*1550mm 5300*1900*1950mm |
Car Weight | 2000kg |
Drive motor | 7.5kw |
Rotating Speed | 4.4/min |
Parking time | 70S |
Drive Mode | Motor + Chain |
Control | PLC type (basic) |
Control Method | Touch screen / Push button or IC card |
Parking way | Forward in, Back out |
Electricity | 3 phases 5 wires, 380V, 50HZ |
Safety devices | 1.Car block device (Positioning) 2.Operation warning device (Warning light) 3.Car position detection device (Over length, over width detection) 4.Malfunction warning device 5.Man or car mistake entrance detection (Photoelectric switch protection devices); 6.Emergency brake device when electricity cut off; 7.Over current flow protection device 8.Key switch against wrong operation; 9.Wrong phase, shortage phase protection, motor over loading protection device; 10.Emergency stop button; |