Mini Hydraulic Space Saving Tilting Car Parking Machine 2200KG
Characteristics
Tilting Parking Lift
1. This mini type tilting parking lift is suitable for limited height area; especially in basement or corners of an apartment;
2. The structure of this type adopts a tilting design of the upper car to make full use of the space;
3. Hydraulic drive with lowest noise and steady operation;
4. Anti-fall device for safety guarantee.
5. Safe and convenient design without construction foundation requirements.
Advantages
1. First safety control with protective devices
1) Anti-dropping device: to prevent the vehicle loading pallet from undesired disconnection.
2) Limited switch device to protect the equipment running.
3) Photoelectric switch (device for checking the entrance of people and vehicles) to prevent the people from accidentally entering into the equipment under operation.
4) Emergency switch: the emergency switch button is used to cut power off when there is anything abnormal during the equipment process.
2. Oil cylinder
Used cylinder reversal, have many advantages, not distortion, dustproof. Adopt Italy Aston Seal ring.
3. Adjusting lifting height, the maximum lifting height can be 1800mm for 2000KG car.
4. Lifting capacity can be 2000kgs;
5. Hydraulic drive, chain balancing device to ensure the balance both ends of rise and fall;
6. Low noise, smooth operation, save energy, low carbon and environmental protection;
7. Vehicle loading pallet fully enclosed design, to avoid oil leakage, rain and snow polluting the lower vehicles;
8. Structure all adopts layer cutting, attractive appearance, easy installation, less malfunctions, easy maintenance.
9. Plastic spraying high quality coating, high anti-corrosion ability, long life. Electrical and driving parts with waterproof characteristics;
10. Simple structure, easy installation, minimal requirements for civil engineering;
11. Certifications: CE
Technical Parameters
Item | Parameters |
Name | Tilting parking lift |
Car size | 5000mmX1850mmX1550mm |
Car weight | 2000kg |
Parking cars | 2 |
Mode of drive | hydraulic |
Parking way | Ground car: Forward into Pallet car: Reverse into |
Electricity | 220V 50HZ 1 phase; 380V 50HZ 3 phases 5 wires |
Voltage of control | AC24V |
Warming devices | Yes |
Lift time | 24S |
Falling time | 24S |
Mode of Lift | Intellectual cylinders |
Motor power | 2.2KW |
Electricity | 50HZ, 220V, 1P/380V, 3P; |
Project case