Shenzhen Siwea Technology Co.,Ltd

 

Barrier gate and Parking system

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsAutomatic Rising Bollards

Stainless Steel Retractable Security Bollards , OEM Hydraulic Bollard System

Stainless Steel Retractable Security Bollards , OEM Hydraulic Bollard System

Stainless Steel Retractable Security Bollards , OEM Hydraulic Bollard System

Product Details:

Place of Origin: China
Brand Name: Siwea
Certification: CE
Model Number: Retractable Security Bollards

Payment & Shipping Terms:

Minimum Order Quantity: negotiate
Price: negotiate
Packaging Details: Wooden Case Package
Delivery Time: 7 workdays after received the payment
Payment Terms: L/C, T/T, Western Union
Supply Ability: 10000 sets per month
Contact Now
Detailed Product Description
Product Name: Retractable Security Bollards Application: Vehicle Access Control
Rising Time: 4S/2S Hydraulic System: Yes
Material: Stainless Steel Column Diameter: 219mm
Stroke Height: 600mm Column Wall Thickness: 6mm

Stainless Steel Retractable Security Bollards , OEM Hydraulic Bollard System

 

Retractable Security Bollards characteristics

 

1, assembly structure, the embedded bucket can be used permanently;

2. In case of power failure or failure, if the lifting column needs to be lowered in the raised state, the raised column can be manually lowered to the horizontal position to allow the vehicle to pass;

3. Optional radar detection function can protect the safety of passing vehicles and pedestrians during the lifting of the lifting column;

4. It can be linked with other intelligent control systems such as Internet of Things, Safe City, and intelligent parking lot management system.

 

Retractable Security Bollards Dimensions

 

Column diameter: 2 1 9 m m, custom-made; stroke height: 600 mm, custom-made; column wall thickness: 6 m m, custom-made; column material is 304 stainless steel;

Optional warning light ring or warning light top for the column.

 

Product Name: Retractable Security Bollards Application: Vehicle Access Control
Rising Time: 4S/2S Hydraulic System: Yes
Material: Stainless Steel Material Column Diameter: 219mm
Stroke Height: 600mm Column Wall Thickness: 6mm

 

Anti-collision principle

 

The car hits the lifting column, the column blocks the car, the floor panel and the limit flange act as the fulcrum of the force. The fulcrum cannot be made of fragile materials such as cast aluminum and cast iron, and the fulcrum must be directly in contact with the embedded, so that it will be strong. Passed to the pre-buried foundation to form a solid support point. The anti-collision flange must be in direct contact with the pre-buried, forming a piston movement, transmitting power directly to the embedded and pre-buried foundation to release energy.

 

Construction plan

 

1, foundation pit opening

 

Use the excavator blasting hammer to carry out the original pavement damage in the slotted range (if the original pavement is a floor tile or stone steps, try to excavate the whole material without destroying the original material), use the pneumatic pick and shovel to cooperate with the excavator to excavate below the ground. To a depth of 1.4 meters.

 

2, Water seepage layer

 

At the installation location, 300 mm m gravel should be placed at the bottom of the foundation pit as the seepage layer of the drainage and repeatedly compacted.

 

3, Equipment in place

 

When the equipment is in place, the equipment is placed on the seepage layer of the pit foundation so that the center of the column is on a horizontal line. Remember to be horizontal on all sides. Leveling with a level or infrared level, the upper surface of the outer cylinder is generally slightly above the ground level of 3 - 5 m m. Backfill 1 5 0 - 2 0 0 m m deep gravel, to achieve the effect of fixing the column.

 

4, Pipeline fixing

 

Use metal galvanized pipe or P V C pipe, elbow, tee, connect the wires of each column to the reserved distribution wells, and reinforce the cables to facilitate the inspection of the lines later. Bundle the wire tube with wire or scotch tape to achieve the function of fixing the line pipe, preventing the cable from being broken when backfilling the concrete, and preventing concrete from being poured in.

 

5, Equipment commissioning

 

Turn on the circuit for the device, and perform the operation of rising and falling. Observe the rise and fall of the equipment, adjust the height of the equipment, and check the equipment for oil leakage.

 

6, Concrete pouring

 

Evenly water the C 3 0 concrete around the equipment to protect the equipment and prevent concrete from entering the equipment. Use a vibrating rod to vibrate the concrete to reduce the gap. After 5 hours, make the surface, and the surface should be flat. If the position of the equipment changes during pouring, it should be stopped in time. After the adjustment is completed, continue construction and complete the second pouring work. After the second pouring is completed for 2 4 hours, it can be debugged but not open to traffic.

 

7, Pavement maintenance

 

The maintenance period is about 7 days. If the motor vehicle needs to pass normally during the curing period, the steel plate should be laid above the equipment to ensure smooth roads.

 

8, Acceptance training

 

After the acceptance of the project, the relevant instruction manual maintenance manual and other materials will be delivered and the designated personnel of Party A will be systematically trained.

 

Contact Details
Shenzhen Siwea Technology Co.,Ltd

Contact Person: sales

Send your inquiry directly to us (0 / 3000)

Other Products